3
MONITOR KITS I
MCK-7-WIFI-MAG
User Manual
E: echomaster@aampglobal-eu.com
W: EchomasterEurope.co.uk
T: +44(0)1420 487110
MONITOR KITS I
MCK-7-WIFI-MAG
Fitting Instructions
Choose a mounting location for the monitor that will not obscure the driver’s
view, check that the monitor is not mounted in a location that will obstruct the
operation of any airbags.
Make sure the mounting area is clean as this may cause the adhesive pad not
to adhere correctly.
When the monitor is mounted, run any cabling behind the dash or trim panels
and make connections in a suitable manner as per the wiring diagram in this
manual.
The monitor harness has a trigger wire, where fitted this will allow the monitor
to auto switch when reverse gear is selected.
The camera has a magnetic base and can be simply placed onto the vehicles
metal bodywork in a convenient location that will provide a suitable field of
vision.
Operating Guide
MONITOR
A short press on the power button
will turn the monitor ON or OFF
When in use icons along the top
edge of the display show the signal
level between camera and monitor
(top left) and camera battery level
(top right)