14
Move the dish a few counts to the west by pressing the key and press the
OK
key to store east limit in this p
osition. The indicated number will be set at 1000 and the highlight will be moved down to the “West Limit” li
ne. Now set the west limit by moving the dish using the key until you have reached the dish limit. The indica
ted number will increase from 1000. Move the dish back a couple of counts using the key and press the
OK
key
to store the west limit.
If either the numeric value is not shown or the message
“...Motor Error...” is displayed on the lower left part of t
he screen, then,
Press the key on the “East Limit” parameter line.
The initial value of 5000 will decrease as the dish i
s moved. Keep moving the dish unit the east limit i
s reached. If the dish to the west when you press th
e key, reverse the motor wires.
Antenna Installation
First the east and west limits have to be set before
any satellites can be programmed.
The dish limits are now stored in the receiver and t
he dish is the most western position. Press the
SA
T
key to start the “Auto Sat” function or you can pr
ess
MENU
to program the satellites manually.
If you do not have a moveable dish, just press the
OK
key twice to program the east and west limit in
the same position. This will be indicated by a
numeric value of 1000 for both limits.
1) an error occurred when moving the dish(which could be caused by i.e. loose wires), or
2) the dish has reached its east limit. In this case continue with the installation procedure.
Antenna Installation
East Limit
West Limit Not Set
i
Exit
×
Not Se t
Ø
1
2
Antenna Installation
West Limit 1070
East Limit 1000
1
2
i
Exit
Press SAT to go to the Auto SAT feature.
Press menu if you want to program the satellites manually.
Press Exit to return to TV/Radio channel.
Now press the or key to select the most western
position you can receive.
Press the
OK
key.
Select the Position option and move the dish using
the key to correct location of the western satellite.
Peak the dish to obtain the highest signal quality
using the and keys. Then press the
OK
key to
store this setting.
8
Please Store most western satellite
Satellite 018.0
°
W
LNB Type Type1
TP/Polar/SR(Digital) 11525/H/12225
Skew Not set
Position E 1000 W
Realign dish +00
Search type Auto Search
Start Search(Press OK)
2
3
4
5
×
INTEL705
Ø
1
EL
WL
Signal Level
Signal Quality
6
7
11%
00%
8
Auto SAT