background image

Note: To stop searching press the         key on the

Using the Auto Search option, the 

EchoStar AD-3000IP

VIACCESS

 searches for all available channels(Radio and

TV) on the currently selected satellite. The names of the fo
und TV channels are shown on the left and the total numb
er of found TV and Radio channels are mentioned on the r
ight.

Auto Search

A Satellite Master Antenna Television (SMATV) system
which is intended for the distribution of  television and
sound signals to household in one or
6

 

more adjacent buildings.

A SMATV System represents a means for sharing
the same resources among several users for satellite and
terrestrial reception, and  it is designed to perform
the adaptation of the satellite TV signals to the SMATV
channel characteristics.

EchoStar AD-3000IP VIACCESS VIACCESS has a SMATV-IF facility to operate with SMATV.
This configuration allows the direct distribution of the QPSK signal received from the satellite
to the SMATV-IF distribution network in the extended IF band (above 950 MHz).

Before you start, you have to check your condition whether it is possible to use this facility or not in your
 households. (You can ask your household supervisor.)

If EchoStar AD-3000IP VIACCESS VIACCESS is connected to a SMATV network, select “

SMATV

Configuration

”.

The most common alternatives for “Symbol rate” and “FEC” are already preprogrammed.
(When you need to change the  “Symbol rate” for the exceptional frequency, select as you know.)
Move to “Start Auto Search” and just press 

OK

.

Then, the “

Auto Search

” procedure will start.

To cancel the processing while the  “

Auto Search

” is proceeding, press the 

MENU

 key.

SMATV Configuration

20

SMATV Configuration

Symbol rate alternative 2                  27500 

Symbol rate alternative 3                    27500 

FEC                                                        AUTO

Start Auto Search

Symbol rate alternative 1

1

2

4

3

5

×

     27500   

Ø

i

 Exit

Auto Search 

ASTRA1

Channel searching status

0%                                     50%                                 100%

Found TV  ch.   : 240
Found RAD. Ch. : 100

Index           Freq             SR            FEC           Polarity
   45           12670          22000          5/6              vertical

Arte
Beta BC
BD1
Estilo
Musicals
Reqqae

remote control or on the front panel. This
cancels the searches and the found
channels will be discarded. All other keys
of the remote are disable during searching

Summary of Contents for AD-3000 IP Viaccess
































Reviews: