A. Receiver and TV set-up
Check the
Installation
To get the most out of the
EchoStar D-2510IP VIACCESS
it should be correctly installed, the dish should
be optimally aligned and the mechanical limit switched on the dish should be set properly. Press /I on
the remote control unit (RCU) or press
on the front panel of the
EchoStar D-2510IP VIACCESS
to
switch the unit on.
5. Operation and Menu Program
12
After selecting the language settings, the ”
LNB Setting
” menu will be shown. Please follow the steps outlined
below to properly install the
EchoStar D-2510IP VIACCESS
.
You can select the desired language for the OSG (On-
Screen Graphics) display using the , keys when the
“Menu Language” option is selected. Similarly you can
selected a different audio channel when the “Audio
Language” option is selected. This option allows you to
select a different language to listen to if supported.
LNB Setting
Select the LNB type which conforms to your LN
B using the , keys.
Other parameter values should be changed
manually according to your LNB type.
Press the
OK
key to confirm your selection.
Select the “LNB Setting” menu in the “Installation” m
enu using the , keys.
If you have a Mechanical Polarizer with your LNB, you have to set the “Polarity Control” parameter in this
menu to [Polarotor].
Language Setting
LNB Setting
LNB Freq. Low Universal
LNB Frq. High
Universal
DiSEqC None
DiSEqC Port 1
Polarity Control 13/18V
LNB Freq. Band Control 0/22kHz
Ku/C Control Disable
LNB Type Index (1..8)
0/22kHz Control Off
0/12V Control Off
LNB Power On
1
2
4
3
5
6
7
8
9
10
11
×
Type 1
Ø
i
Language Setting
Menu Language
Main Audio Language English
×
English
Ø
1
2
2nd Audio Language English
Subtitle Language English
3
4
Exit
i
