15
If you are not satisfied with the Limit parameters e.g. since the
mechanical limits might not be set properly, you can erase the
position data and start again after adjusting the mechanical
limits at the dish.
Motorized Dish Setting
Erase Position Data
If you want to erase all the position data, select “
Erase Posit
ion Data
” and press the
RED
key twice.
Motorized Dish Setting
Fixed dish
Antenna Installation
1
2
Exit
i
The
EchoStar D-2510IP VIACCESS
now has
programmed the position of all selected satellites.
The next step is to store all channels on these
satellites. To do this press the
MENU
key, select
the Installation option followed by the Program
Satellites option. Use the key to select the next
satellite and press the
OK
key. The dish will
move to the selected satellite.
Select Start Search to store all channels.
Repeat this procedure for all satellites.
Program Satellites
LNB Type Type 1
TP/Pol/SR(Digital) 11662/V/27500
Skew Not set
Position E 1070 W
Re-align Dish +00
Search Type Auto Search
Start Search (Press OK)
Satellite 013.0
?
E
1
2
4
3
5
6
7
8
×
HOTBIRD
Ø
[E 1070 W]
EL
WL
Signal Level 10%
Signal Quality 5%
Program Satellites
Erase Position Data
3
Fixed Dish
Fixed dish
LNB Type Type 1
Select Satellite
1
2
Fixed Cancel LNB set
i
Exit
×
ASTRA1
Ø
If you want a fixed dish and an actuated dish, you can set
in this menu the “Fixed dish”.
Start with selecting the appropriate satellite and LNB Type
and press the
RED
key twice.
To make a satellite again actuated, change the LNB Type
to the actuated LNB type and press the
RED
key twice.
Motorized Dish Setting
Fixed Dish
Antenna Installation
3
2
Delete Cancel Exit
i
Erase Position Data
1
