16
•
Using the Web UI
H64159 Revision A
Home page
The Home page shows the current terminal status and
allows you to setup your initial data connection.
On the left side of the page is the Status bar. These items
are updated automatically when the status of any of these
items change.
1.
Connection: This field indicates whether you are
Registered with the Network. It also shows the PS and
CS status, beam type with current satellite and receive
signal quality.
a.
PS Attach Status
: This field indicates whether
you are PS (Packet Switch) attached with the
Network. You will still need to setup a PDP
context in order to send PS data.
b.
CS Attach Status
: This indicates whether you are
CS (Circuit Switch) attached with the Network.
Once you are CS Attached and Registered with the
network, you can make CS calls.
2.
GPS: This field displays the current GPS position
status. If you have received a GPS fix and the
Network GPS policy has been received and it allows
the GPS position to be shown to the user, it will
display the Latitude, Longitude, Fix Quality, and the
Last time the GPS position was updated. Time
displayed is UTC time. If it displays “Waiting”, the
terminal has a GPS fix but it is waiting for the GPS
policy from registration before displaying the
coordinates.
3.
BGAN Terminal: This field indicates the WLAN
status (except on the 9450E or 9450L).
4.
Antenna Unit: This field indicates the detailed state of
the tracking antenna.
•
The different tracking states are as follows:
•
Initial – this is when the 9450 is first powered
On
•
Unknown – this state is when the 9450 is
powering up and communication to the
antenna has not started yet.
•
Tracking & Tuning – this state is when the
antenna starts to track the satellite in both
azimuth and elevation and is optimizing its
orientation.
•
Tracking – this is the normal state when the
antenna is tracking the satellite.
