www.echostar-int.com
Page 2 - 17
©
20
04
Ech
o
S
tar
In
te
rn
ati
o
nal
C
o
rp
or
at
io
n
Al
l ri
g
h
ts
r
e
s
e
rv
e
d
Tuner
(T1-T2 only)
To define the tuner for the selected SAT.
Red: Direct access to the search mode menu
TP
Shows a transponder, from the internal database, of the defined SAT. If the signal indicator
shows low levels, select another TP that gives a better signal.
Red: Direct access to the search mode menu
Blue: Direct access to the Add/Edit data menu; to add/edit a SAT or TP that is not listed
(for detailed information refer to the explanation of the Add/Edit data menu.
USALS
To set the USALS motor control to On or Off for the selected satellite.
Red: Direct access to the search mode menu.
Position
To set the orbital position of the defined SAT.
Red: Direct access to the search mode menu.
Port
(DiSEqC only)
To select the port for the selected satellite,
Red: Direct access to the search mode menu.
Search mode
All
To search for all available channels, scrambled and Free-To-Air, on the selected satellite.
Red: To start the Search channels.
Network
To search for all channels that are available within the Network.
Red: To start the Search channels.
TP
To search for all available channels on the selected transponder (TP).
Red: To start the Search channels.
FTA
To search only for Free-To-Air channels on the selected satellite.
Red: To start the Search channels.
Search channels
Search channels does a channel search on the defined SAT.
1. Search channels
Auto
(Fixed dish installations only)
SAT
To select the satellite you want to search channels on.
Red: To start the Search channels.
All
To search for all available channels, scrambled and Free-To-Air, on the selected satellite.
Red: To start the Search channels.
FTA
To search only for Free-To-Air channels on the selected satellite.
Red: To start the Search channels.
