Quick Reference Guide
Page 2
EchoStar International Corporation
© 2
004
Ec
h
o
S
ta
r I
n
te
rn
at
io
na
l
Co
rp
or
a
tio
n
A
ll ri
gh
ts
re
serve
d
2.
T
O
INSTALL
THE
RECEIVER
For the location and availability of the basic front panel controls, please refer to the front panel as
shown on the packaging. If available, the basic front panel controls are:
For the location and availability of the connectors, please refer to the rear panel as shown on the
packaging. If available, the connectors on the rear panel are:
WARNING
ALL
EQUIPMENT
INVOLVED
IN
THE
INSTALLATION
TASK
MUST
BE
INSTALLED
CORRECTLY
AND
SWITCHED
OFF
. M
AKE
SURE
THAT
IT
IS
SAFE
TO
PROCEED
WITH
THE
INSTALLATION
TASK
. U
NSAFE
CIRCUITS
AND
INSTALLATIONS
CAN
CAUSE
(
SERIOUS
)
INJURY
OR
DAMAGE
TO
EQUIPMENT
.
The standby/on button, to switch the receiver to Standby or On.
The arrow up button, to move one channel up.
The arrow down button, to move one channel down.
Indicators
The orange indicator shows that there is sufficient signal received;
The red indicator shows that the receiver is in standby;
The green indicator shows that the receiver is set to on.
ANT IN
(IEC), to connect a terrestrial aerial
(analogue and digital broadcasts
).
TV OUT
(IEC),
to connect a VCR or TV (analogue only).
RS-232
(sub-D), for the connection to the serial communication port of a PC.
(Black)
S/PDIF
(RCA), to connect to a Dolby Digital amplifier or home cinema equipment.
TV
(SCART), to connect to a TV with a fully-featured SCART cable;
VCR
(SCART), to connect to a VCR with a fully-featured SCART cable.
(White)
AUDIO L
(RCA), to connect to the left audio input of a stereo set.
(Red)
AUDIO R
(RCA), to connect to the right audio input of a stereo set.
3.
F
IRST
TIME
INSTALLATION
1. Make sure, all connections are made safely.
2. Switch the receiver to ON and wait for the
System setup menu to appear.
3. Select your Menu language and press the
SELECT key.
4. Wait for the Channels setup menu to
appear.
5. Press the red key to start the automatic
channel search.
6. Wait for the Search channels to complete.
7. Press the EXIT key (3x) until live video
shows.
