Description and Operation
www.echostar-int.com
Page 2 - 5
©
20
04
Ech
o
S
tar
In
te
rn
ati
o
nal
C
o
rp
or
at
io
n
Al
l ri
g
h
ts
r
e
s
e
rv
e
d
5.
I
NSTALLATION
MAINTENANCE
NOTE
There are different procedures for a reset of the receiver.
■
Factory reset - to delete all settings and start with the Guided setup.
■
Delete channels - to delete all channels from the channel and favorite lists.
Only the procedure for a Factory reset followed by the Guided setup is given.
I
F
YOU
WANT
TO
DO
A
FACTORY
RESET
:
1. Press the MENU key.
2. Select User data -
Maintenance - Factory reset
and press the OK key.
3. Enter your PIN-code.
4. Select Yes.
5. Wait for the Guided setup
menu to appear.
6. Press the green key to start
the automatic channel
search.
7. Select Yes.
8. Wait for the Search
channels to complete.
9. Press the OK key to
confirm.
10. Now the receiver is ready
for use.
I
F
YOU
WANT
TO
DO
A
D
ELETE
CHANNELS
ONLY
:
1. Press the MENU key.
2. Select User data -
Maintenance - Delete
channels and press the
OK key.
3. Enter your PIN-code.
4. Select Yes.
5. Wait for the Delete channels
to complete.
6. When the User data -
System setup - Search
channels option shows,
press the OK key to start.
7. Select Yes.
8. Wait for the Search
channels to complete.
9. Press the OK key to
confirm.
10. Now the receiver is ready
for use.
I
F
YOU
WANT
TO
CHANGE
A
PID:
1. Press the MENU key.
2. Select User data - System
setup - Edit mux and press
the OK key.
3. Select a network and press
the green key.
4. Make the required
selections as indicated by
your service provider.
5. Use the signal indicator to
make sure that the signal is
available.
6. Select Confirm and press
the OK key.
7. Press the red key.
8. Press the OK key to o start
the automatic channel
search.
9. Wait for the Search
channels to complete.
10. Press the OK key to
confirm.
11. Now the receiver is ready
for use.
Factory reset / Delete channels.
Select the Network that you want to edit.
Press green to edit PID.
