B-FOCuS Router 312+
User Guide
ECI Telecom Ltd. Proprietary
8
DWG# 458006-0833-010 A00
5
Buttons and LEDs
5.1 Buttons/Ports
This section describes the ports and buttons on the router.
Figure 2. B-FOCuS Router 312+ Back Panel
•
Reset Button.
To reset the router, press and release the Reset button;
after about 30 seconds the unit will become operational.
•
Restore to Factory Defaults.
You may need to restore the factory
defaults if the configuration of your unit is changed, if you lose both
network connectivity and the ability to interface to the unit via the web
interface, or following a failed software upgrade. To restore factory
defaults, press the Reset button for more than 10 seconds. The unit
reverts to its factory defaults and after about 30 seconds becomes
operational again.
•
LAN (Local Area Network) Port.
Connect to Ethernet network
devices, such as a PC, hub, switch, or router. Depending on the
connection, you may need a cross-over cable or a straight-through
cable.
•
Power.
Make sure you observe the proper power requirements.
•
ADSL Port.
WAN interface that connects directly to the phone line.
Reset
Button
LAN
Port
Power
ADSL
Port
On/Off
Button
