B-FOCuS 270/285/400 PR
Configuration Manual
ECI Telecom Ltd. Proprietary
14
Note:
You cannot change the VCI and VPI values using the Modify command. Instead,
delete the old line from the table at the bottom of the dialog box and add a new line
with the new parameters.
To delete a configuration:
1. Select the line you want to delete from the table at the bottom of the dialog box.
2. Click
Delete
.
3. Check that the line is deleted from the table at the bottom of the dialog box.
4.3. LAN
Setup
When the LAN Setup menu is selected from the Basic menu, the LAN Setup dialog
box appears:
Define the IP address and subnet mask of the router towards the LAN (port eth0) and
click
Apply
.
4.4. Routing
Setup
When the Routing Setup menu is selected from the Basic menu, the Routing Setup
dialog box appears.
The table displays all the routers recognized in the network. It contains both static
routing lines that can be edited (added, edited, deleted) and dynamic routing lines,
generated dynamically by the router’s communication protocol. The routing table
defines through which port each packet is sent, according to its specified destination.
Summary of Contents for B-FOCuS 270
Page 1: ...B FOCuS 270 285 400PR Router Configuration Manual www ecitele com ...
Page 6: ...B FOCuS 270 285 400 PR Configuration Manual ECI Telecom Ltd Proprietary 6 ...
Page 54: ...B FOCuS 270 285 400 PR Configuration Manual ECI Telecom Ltd Proprietary 54 ...
Page 58: ...B FOCuS 270 285 400 PR Configuration Manual ECI Telecom Ltd Proprietary 58 ...