B-FOCuS 270/285/400 PR
Configuration Manual
ECI Telecom Ltd. Proprietary
15
After a new router is installed, the RIP protocol is set by default to Off. To activate it,
the status must be changed to On. In addition, you can define the RIP version to be
used.
For additional information concerning the RIP protocol, click
RIP Information
. The
RIP List window appears.
This list appears for the B-FOCuS 270/285PR.
This list appears for the B-FOCuS 400PR.
4.5. Save
&
Reboot
When a new configuration has been defined, it must be burned into the router’s
internal flash memory. Then the router must be restarted. The new configuration
becomes effective only after it has been saved and the router has been restarted.
When selecting Save & Reboot from the Basic menu, the following dialog box
appears.
Click
Save
. When an acknowledgement is received, click
Reboot
.
Summary of Contents for B-FOCuS 270
Page 1: ...B FOCuS 270 285 400PR Router Configuration Manual www ecitele com ...
Page 6: ...B FOCuS 270 285 400 PR Configuration Manual ECI Telecom Ltd Proprietary 6 ...
Page 54: ...B FOCuS 270 285 400 PR Configuration Manual ECI Telecom Ltd Proprietary 54 ...
Page 58: ...B FOCuS 270 285 400 PR Configuration Manual ECI Telecom Ltd Proprietary 58 ...