B-FOCuS O-4F2PW/O-4G2PW Hardware Installation Manual
02-Oct-2011
ECI Telecom Ltd. Proprietary
26
Rev 0.1
iii)
IP Filter
In IP Filter page, one can add IP filtering rules.
Below is the description for the parameters:
Parameter
Description
Enable IP Filter
Select or unselect this check box, to enable or
disable IP filtering function.
Mode
Include two mode: Drop or Accept. Drop means
blocking the IP flows that meet the rule. Accept
means allowing the IP flows that meet the rule
Source Start IP Address
Setup source start IP address
Source End IP Address
Setup source end IP address
Destination Start IP Address
Setup destination start IP address
Destination End IP Address
Setup destination end IP address
Protocol
Select Protocol. There are following options:
1) ALL, all protocols
2) TCP
3) UDP
4) TCP/UDP
5) ICMP
Add Button
Click this button, to add a new filtering rule for
above configurations.
After the configurations are done, click “Save” button to save it.
