Firmware V6.6.9
29.07.2020
68/147
•
•
•
•
•
•
•
•
•
•
Note
: The digital inputs of the SIOX extension module in the example are used / configured as follows:
The first 8 digital inputs A2..H2 have been configured for 230 V AC using jumpers.
Ideally, A2..H2 are connected to N.
The first two digital inputs A1/A2 and B1/B2 are used for system monitoring.
The ninth digital input I1/I2 is connected to PE for the electrical isolation of the high / low voltage side.
The 3 digital inputs 10..12 have been configured for 24 V AC/DC using jumpers.
The tenth digital input (J1/J2) is used as 24 V DC energy meter.
Note
: A power supply (part number KGLNT23024) may be required for the supply of the meter.
Digital input
Terminal No.
Function
Without switch *
With switch *
1
A1, A2
50, 51
Alarm and message inputs (e.g. for detection of
external alarms)
Meter inputs for energy, gas, water and event
Meter inputs for recording of the high and low tariff
(HT/LT)
Synchronisation inputs for acquisition of the
synchronisation pulse of the power company
2
B1, B2
52, 53
3
C1, C2
54, 55
4
D1, D2
56, 57
5
E1, E2
58, 59
6
F1, F2
60, 61
7
G1, G2
62, 63
8
H1, H2
64, 65
9
I1, I2
66, 67
Detailed safety instructions and information for the configuration of the jumpers for the digital inputs are
provided in chapter
SIOX - configuration of the jumpers