LAN Gateway Firmware V1.2
V1.8 25. April 2012
© 2012 – ECKELMANN AG | BERLINER STRASSE 161 | 65205 WIESBADEN | PHONE +49(0)611 7103-0 | FAX +49(0)611 7103-133 | eckelmann.de
10/34
4.2.1 Calling up and configurating the "HyperTerminal" terminal program
In the standard Windows installation
1
(for example, Windows 2000/XP), at
Start -> programs -> accessories -> communications -> HyperTerminal
a terminal program permits communication between the PC and the LAN Gateway via the serial interface
(by means of null modem cable).
After launching the program, a name must first be entered
(e.g. LAN Gateway) together with a symbol for the desired connection.
The port must be selected where the null modem cable is attached
(e.g. COM13, just like LDSWin).
The program first requests the various telephone connection settings
(country, region and area code). These details have no significance for
the connection with the LAN Gateway and they can therefore be selected
quite freely.
In the mask that will now open, the following settings can be made for the
serial interface.
1
In Widows Vista and higher, the HyperTerminal is no longer included. Alternatively, the program
Terra Term
mentioned in
chapter 9.2can be used.
