9
7.2.2. Remote control
(Only applies to the eMOTUS5PB model)
º
1.
Turn on
: on/off. The green LED display lights up when the unit is on. When off,
no LED is displayed.
2.
LED display
: turn on/off the LEDs while the unit is operating. When restarting
the unit, this function returns to its default value: LEDs on.
3.
MUTE
. The red LED blinks on and off when the unit is muted.
4.
BT
: wireless connection. The blue LED light turns on when there is a BT
connection by pressing the BT key.
5.
UNBAL
: select the stereo unbalanced RCA input as the audio input source.
6.
BAL
: select the stereo balanced Euroblock input as the audio input source.
7.
Volume
: increase/decrease the volume in 1 step (range available in 0-36 steps).
This only operates when the unit is on.
8.
Bass & Trebl
e: increases/decreases by 1 dB (range available of -7 to +7dB) in
bass/treble.
9.
BT priority
: if priority is activated, whenever it detects a wireless connection
available, this will take priority over the other audio inputs and will automatically
switch over to this.
10.
Auto Standby
: keep pressed (for 2 secs.) to activate/deactivate the auto standby
function. If this is activated, after 2`30” with no audio in the inputs and if the
remote controlled is not used, the unit will switch to standby mode.
11.
Reset
: keep pressed (for 2 secs.) to reset the system to its default values: BT
priority ON, volume = 30 bass; treble = 0.
12.
Flat
: keep pressed (for 2 secs.) to reset the system to its default equalizer values:
bass = 0; treble = 0.
