7
▪
PAGER: by selection of destination zones, pressing the PAGE key
and voice announcing in real time from eMPAGE type call stations.
Chime tone available to be triggered prior to message voicing by
activating the PAGE function. Available on local inputs 7 and 8 on
HUB1616, local inputs 5 and 6 on HUB1408 (PAGER A and
PAGER B, respectively)
•
Processing available in outputs:
o
Mono mode (outputs managed individually) or stereo mode (areas
managed in natural pairs: 1-2, 3-4, etc.). Automatic management of mono
or stereo audio sources routed to mono or stereo outputs
o
Program source selection (local or remote audio inputs)
o
3-tone equalization adjustment via BASS-MID-TREBLE controls
o
Volume adjustment and MUTE control
o
Limitation of the range of available output volume (minimum and maximum
levels) to the end user, from any control method (eMCONTROL1 panels,
pilot application clients, etc.)
o
Phase inversion
o
Enablement for silencing via rear panel MUTE port (via external contact
closure)
o
Delay setting: available for zone outputs 1 to 8 on HUB1616, all zone
outputs on HUB1408
o
Crossover filter: Filter-low-pass (LPF) or filter-high-pass (HPF) setting
with cut-off frequency adjustment Available for zone outputs 1 to 8 on
HUB1616, all zone outputs on HUB1408
o
8-band graphic equalizer.
o
8-band graphic equalizer. Available on all zone outputs on both models
o
Compressor/limiter available on all zone outputs on both models
•
General Volume: general volume control, of all outputs or a selection of them
•
Programming and control as an Administrator (
admin
) user from the
HANGAR
embedded web application
, using a computer, tablet or mobile device and a
standard web browser (no dedicated software installation)
•
Remote control of end users by:
o
Front panel control, with configurable access restrictions
o
eMCONTROL1-type physical wall panels
o
eMPAGE-type paging stations
o
Ecler pilot
application, available for iOS and Android client devices
o
Standard web browsers, from computers, tablets, etc.
