51-0549-0100 M10-20 MIMO4040CDN MIMO7272DN Music Verification 9 of 10
3.
Press “ACEPTAR” to remove the POP-UP message. Then click on the PRINT button and confirm
to print the LABEL. Select TWO copies, as one is placed into the D.U.T and the other into the
CARTON BOX (as specified in the drawing 32-0378).
4. Finally, check the MAC ADDRESS given by the ECLERNET MANAGER to be the same as in the
LABEL printed, under the NETWORKING area. The process is correct if both MAC ADDRESSES
are the same.
RESTORE DEFAULTS and UPGRADE FIRMWARE
1. Before doing the NEXT STEP, check the FIRMWARE VERSION of the D.U.T and UPGRADE it
to the LATEST in case is older.
2. POWER OFF the D.U.T. Press the FD button at the BACK of the D.U.T (FD stands for
FIRMWARE DEFAULTS). While pressing, POWER ON the D.U.T. Connect to it into ECLERNET
MANAGER and verify that all the SETTINGS and CHANGES have been restored.
b. When RESTORE DEFAULTS, the DATA LED will blink until the D.U.T resets itself.
3. Finally, check the OPERATING TIME has been restored to 0h, 0min.
Summary of Contents for MIMO4040CDN
