6
Programming and remote management via Ethernet via EclerNet Manager
application (either point-to-point, with direct CAT5/CAT6 cable, or from an
Ethernet network connection)
Remote control via custom control panels UCP (User Control Panels)
iOS and Android remote control app available (Ecler UCP V2)
Remote control from third party external devices. (Crestron, AMX, Extron,
Medialon, etc., are registered brands from their respective owners). TP-NET
protocol, through Ethernet o RS-232 ports
Remote control via panels and digital consoles connected to the same Ethernet
network (WPNET and PAGENETDN series)
Embedded UCP panel server: EclerNet projects executed in the internal matrix
engine, acting as UCP server and as
hardware
control included in the project.
Configuration memory management (presets).
Events scheduled on a calendar basis
Broad DSP processing configurable. Exemples:
o
Matrix router-mixer, from any input to any output (analog and/or digital
Dante™) with adjustable crosspoint level (independent mixes of different
inputs for each output).
o
Treatment of channels in mono or stereo mode.
o
Level, mute, vumeters and phase adjustment in inputs and outputs.
o
Internal signal generator (sinusoidal signal, pink noise, white noise,
polarity test).
o
Parametric EQ on inputs and outputs.
o
Delays on inputs and outputs.
o
Noise gate / compressor on input channels.
o
Compressor / limiter on outputs.
o
Priorities (ducking) between input channels.
o
Virtual and physical paging consoles
The programming of the MIMO4040DN is done using the EclerNet Manager application
(*)
. Refer to the EclerNet Manager Application manual for more information.
(*)
The EclerNet Manager application is available for download at
