5
IMPORTANT NOTE
Thank you for choosing our Ecler
MIMO88SG / 1212SG Installation Digital Matrix
!
It is
VERY IMPORTANT
to carefully read this manual and to fully understand its
contents before any connection in order to maximize your use and get the best
performance from this equipment.
To ensure optimal operation of this device, we strongly recommend that its maintenance
be carried out by our authorised Technical Services.
Ecler
MIMO88SG / 1212SG
comes with a
3-year warranty
.
INTRODUCTION
The MIMO SG is a series of fully programmable digital audio matrixes, with the following
features:
•
8 (MIMO88SG) or 12 (MIMO1212SG) balanced MIC/LINE inputs (independent
phantom power per input channel).
•
8 (MIMO88SG) or 12 (MIMO1212SG) balanced LINE outputs.
•
8 (MIMO88SG) or 12 (MIMO1212SG) GPI control ports (
General Purpose Input
).
•
Programming and remote management via Ethernet using EclerNet Manager (or
point to point, with a direct CAT5 cable, or from an Ethernet network).
•
Remote control via UCP (User Control Panel) clients on Ethernet: simultaneous
clients with customized control panel, such as WPmSCREEN Ecler, Android®,
iOS®, Windows®, etc.
•
Remote control from third party external devices. (Crestron, AMX, Vity, Medialon,
etc. Registered trademarks of their manufacturers). TP-NET protocol, via Ethernet
or RS-232 ports.
•
Remote control bus for WPTOUCH digital panels and MPAGE16 messaging
consoles (
paging
).
•
Configuration memory (
presets
) management.
•
Scheduled events based on calendar.
•
Extensive DSP available:
o
Routing matrix/mixer, from any input to any output with adjustable level
for crossover points (independent mixes of different inputs for each
output).
o
Mono or stereo channel processing.
o
Level control, mute, vu-meters and phase adjustment for inputs and
outputs.
o
Internal signal generator (sine wave, pink noise, white noise, polarity test).
o
Parametric EQ on inputs and outputs.
