10
1
SW
3.6
GPI REMOTE CONTROL PORTS
PLAYER ZERO has 2 GPI control inputs on its rear panel. These inputs can be connected
to an external physical device (e.g. a contact closure) and associated with an PLAYER
ZERO function:
•
Load and play previously configured audio content
•
Preset recall
•
Audio playback with priority over the music program
•
Transport bar control (PLAY/PAUSE, STOP, etc.)
•
Internal triggering, to interact with other player services (scripts for example)
GPI connectors use 3-position screw terminal blocks (Euroblocks). The wiring is as follows:
GPI terminal >
− 1, 2
terminals
Ground
>
⊥
terminal
Figure 1: Connection example of GPI 2
Connecting cables can be up to 500 meters long
with a minimum section of 0,5 mm
2
.
