background image

 

 

 

IMPORTANT REMARK 

 

 

The lightning flash with arrowhead symbol, within an equilateral triangle, is 

intended to alert the user to the presence of uninsulated “dangerous voltage” 
within  the  product’s  enclosure  that  may  be  of  sufficient  magnitude  to 

constitute a risk of electric shock to persons. 

The exclamation point within an equilateral triangle is intended to alert the 
user  to  the  presence  of  important  operating  and  maintenance  (servicing) 
instructions in the literature accompanying the appliance. 

WARNING (If applicable):

 The 

terminals marked with symbol of “

” may be of 

sufficient magnitude to constitute a risk of electric shock. The external wiring connected 
to the terminals requires installation by an instructed person or the use of ready-made 
leads or cords. 

WARNING

:

 To prevent fire or shock hazard, do not expose this equipment to rain or 

moisture. 

WARNING

:

  An  apparatus  with  Class  I  construction  shall  be  connected  to  a  mains 

socket-outlet with a protective earthing connection.  

 

IMPORTANT SAFETY INSTRUCTIONS 

1.

 

Read these instructions.

 

2.

 

Keep these instructions. 

3.

 

Heed all warnings. 

4.

 

Follow all instructions. 

5.

 

Do not use this apparatus near water. 

6.

 

Clean only with dry cloth. 

7.

 

Do  not  block  any  ventilation  openings.  Install  in  accordance  with  the 

manufacturer’s instructions.

 

8.

 

Do not install near any heat sources such as radiators, heat registers, stoves, or 
other apparatus (including amplifiers) that produce heat. 

 

Summary of Contents for VEO-AEXS4












Reviews: