7
7.
CONNECTION AND INSTALLATION
1.
Connect HDMI signal source (such as PC, Blu-ray player, etc) to VEO-SPH44
HDMI input port.
2.
Connect VEO-SPH44 HDMI output ports to displays.
3.
Power up VEO-SPH44, displays and sources.
Note:
HDCP version is prior to EDID: 4K@60Hz EDID settings will be accepted only if
displays are HDCP 2.2 compliant, otherwise output will be automatically set to
1080p@60Hz
Please check the following table:
HDR formats are not supported when VEO-SPH42 is in “Auto” mode.
8.
APPLICATION DIAGRAM
