50
11.4.1. Setting the video output mode for the receiver
•
Enable Video over IP:
Select this box to activate Video over IP extension
•
Enable Video Wall:
Select to activate the function for putting together a video wall
•
Enable EDID Copy:
This function allows you to copy the EDID output and send the
information to the Transmitter. Limited to unicast mode
•
Scaler Output Mode:
Selects the output mode for the desired scaling. Select
"customize” and type in 8 hexadecimal values for greater video output resolution
and refresh rate selections
For example:
1.
80000004: HD 720p60
2.
81000061: WXGA 1366x768@60
3.
81000040: WXGA+ 1440x900@60
4.
81000051: WUXGA 1920x1200@60
5.
8100003C: SXGA+ 1400x1050@60
etc.
Timeout for Detecting Video Lost:
Set the time frame for stopping video at the output
once it has detected that the HDMI signal from the transmitter has been lost. The
detection of the loss of video signal will depend, first of all, on the status of the "Turn off
screen on video host" feature. The modes of operation are: