15
Follow these steps to install a CUBE unit on a wall:
1.
Drill three 6 mm holes in the wall, matching the position of the holes in the bracket.
2.
Insert three 6 mm wall plugs into them.
3.
Place the wall bracket in place, previously passing the supplied AC cable (if required)
through the square hole in the bracket. Attach the bracket to the wall.
4.
Place the speaker in its final position by sliding it vertically downward so that the
guide on its back side matches the guide on the bracket.
5.
Fasten the safety guide at the back of the mount (as shown in the diagram).
6.
Orient the loudspeaker to the desired position on the vertical and horizontal axes.
Tighten the Allen screws on the bracket to fix this position on both axes.
7.
Power ON the unit by means of the back panel ON/OFF switch.
