USER MANUAL / MANUAL DE USUARIO
– MICROSTAR
Page
11
of
60
INMANUUML017 USER MANUALM. USO OM-100 V.2022.05 ENGESP US
2) Insert the 27mm bolt as shown in the picture.
3) Tighten the 27mm bolt to the column as shown in the picture using a socket, fixed or
adjustable wrench.
4)
Loosen the 3 Allen screws at the column’s receiving end by using the 3/16’’ Allen key
provided. Place the microscope’s arm, as shown in the figure. You must achieve a perfect fit
with the column. Fully tighten the 3 screws on the columns.
5) Introduce the head fork pole into the receiver at the end of the pantographic arm and adjust
the notch screw firmly.
Do not take off the angled piece safety notch screw during the procedure using the
microscope with a patient in order to prevent the fall of the optical Head.
