28
1) You can set the direction of camera by using the arrow buttons.
2) Setup : If you press Menu button in PTZ Menu, camera setup window will appear.
3) Zoom In/Out : You can zoom in with #1 button and zoom out with #2 button.
4) Focus In/Out : You can adjust the focus with #3 and #4 buttons.
5) Iris In/Out : You can adjust the iris with #5 and #6 buttons.
6) Pattern : This DVR can support the pattern if the camera has this function.
- Start(#7) : This sets the pattern start.
- Stop(#8) : This sets the pattern stop.
- Run(#9) : This starts to run pattern.
7) Preset : You can toggle between the PTZ window and Preset window using
‘Enter’ button.
- Direct Call(#1~6) : You can go directly to the position 1 to 6.
- Call(#7) : You can go the other position using this button.
- Set(#8) : You can set the preset position up to 32.
- Clear(#9) : This will clear the preset position information.
- Clear All(#0) : This will clear the preset position information.
- Tour(Menu button) : If you press this button, the camera moves to the position
sequentially. To stop the tour, press the tour button once again.
3-1-4. PTZ (Pan, Tilt and Zoom)
It is possible to control the pan and tilt camera by itself. Press the ‘PTZ’ button to
enter the PTZ mode. For Menu setting, you can set it by pressing button as displayed
at bottom of window.
CH 3 How to Use
Summary of Contents for Nubix
Page 1: ......
