Eclipse 316SW, Owner'S Manual

− 8 −

ENGLISH

④

Phase select switch

This switch is used to select the speaker

phase.

The ambience of the sound being listened to

may change when the position of this switch is

changed. 

The effects will change depending on the main

speaker combination being used and on the

setting-up environment, so listen to the sound

being played back and select the switch

setting that provides the most natural

playback.

※

When you change a switch , please make

volume small for noise prevention.

⑤

Power switch

This switch turns the power on and off.

⑥

LINE IN terminal

This terminal is used to input signals that are

output from the LINE OUT terminal of a sub-

woofer (super woofer) of an AV amplifier or

directly from an amplifier.

⑦

LINE OUT terminal

This terminal outputs the signals that are input to

the terminal in 6. above.

It can be used when another unit or 508PA

connected to this unit. (The volume

adjustment knob of this unit will not work for

both units.)

⑧

Power input terminal

This terminal is used to connect the unit via

the attachment power cord to a 230 V

household electrical outlet.