32
3. Map displays
Basic operation
Switching the map reduction scale
The map reduction scale (map range) can be switched to any desired setting from
40,960,000:1 to 5,000:1. Also, if a destination is set, you can select a reduction scale showing
the entire route to the destination with one touch.
To widen the map's range, touch
. To shrink it down, touch
.
●
Every time the switch is touched, the
scale goes up/down one level.
●
After touching
or
, touch a
number on the scale bar to switch to
the reduction scale represented by that
number.
●
Hold
or
for at least 1 second to
switch the scale without increments
(free zoom).
●
The selected reduction scale will be
indicated with a yellow mark (
).
Touch
switch
Reduction
scale
Scale
display
Touch
switch
Reduction
scale
Scale
display
1/0.01
million
1/0.02
million
1/0.04
million
1/0.08
million
1/0.64
million
1/1.28
million
1/2.56
million
1/5.12
million
1/10.24
million
1/20.48
million
1/0.005
million
150ft
300ft
700ft
0.25mi
0.5mi
4mi
8mi
16mi
30mi
60mi
130mi
1/40.96
million
250mi
1/0.16
million
1/0.32
million
1mi
2mi
Switching to the desired reduction scale
Scale bar
●
The
switch will disappear when set to the maximum range (250 mile scale
diagram). The
switch will disappear when set to the minimum range (150 ft
scale diagram).
●
For safety reasons, the free zoom function and scale bar cannot be operated
while driving.
Summary of Contents for AVN 5495
