84
84
Others
About the Steering Wheel Switches
On vehicles equipped with steering wheel switches, these easy-access switches can be used
to perform the main audio and other operations.
From E-iSERV Website (http://www.e-iserv.jp), download data for the steering wheel switches
onto a CD-R. Then, load the data into the main unit to save it.
●
For details of the steering wheel switch, please contact your local dealer.
●
This function may not be available depending on the vehicle type.
You cannot operate the vehicle's steering
wheel switches that have been loaded at the
factory even if you have installed the
AVN4430. You can download the software to
enable these functions from the ECLIPSE
website (E-iSERV). Import this software into
your AVN4430.
For details, contact the store from which you
purchased your main unit. Depending on
your vehicle’s make and model, material
downloaded from the website may not be
compatible with your steering wheel switch.
Consult the store from which you purchased
your AVN4430 about compatibility and set-up
procedures. Download the steering wheel
switch software in the following procedure,
turn the receiver power switch off (standby
state), and import the software to this
receiver.
L
L
L
L
Setting the steering
wheel switch functions
Access The ECLIPSE website.
(URL: http://www.e-iserv.jp)
Download the steering wheel switch software
following instructions provided on the ECLIPSE
website (E-iSERV). (Because material available
on the website may not be compatible with the
steering wheel switches found on some
automobiles, make sure to check the website for
details about compatibility.)
Copy the downloaded software to CD-R.
Import into the main unit.
You can operate the steering wheel switches.