Eclipse AVN76D Owner'S Manual Download

Page: 156 / 215

154

Using MP3/WMA Player

Audio Operations

■

Select from linked folders

●

: Goes to previous folder and plays

the first track in this folder.

: Goes to folder one level higher and

plays the first track of this folder.

ATTENTION

If no MP3 files exist in the folder, “NO DATA”
will appear in the section where the file name
and folder name are displayed.

You can select a desired music file from the
folder.

■

Selecting from file name switch

●

When the following screen is displayed,
touch

to change between

items.

●

Touch

to return to the immediately

preceding screen.

●

This plays the selected music file.

●

When the following screen is displayed,
touch

to change between

items.

●

Touch

to return to the immediately

preceding screen.

Press

or .

Selecting Desired Music
File

Touch .

List

Select the folder you wish to use.

Touch the file you wish to play.

Summary of Contents for AVN76D
























































































































































































































Search results

Summary of Contents for AVN76D

Reviews:

Related manuals for AVN76D

Brands by name

Popular brands

Eclipse AVN76D, Owner'S Manual

Search results

Summary of Contents for AVN76D

Reviews:

Related manuals for AVN76D

Brands by name

Popular brands