- 5 -
- Assembling the speaker stand (for D3
Ⅱ
) -
Install the base plate and the post with the pan-head
bolt.
1
Pan-head bolt
Hexagonal bolt
Speaker
Insert the Hexagonal bolt (speaker turn-prevention
bolts) into the joint.
2
Assemble the joint and the post with the Hexagonal
bolt.
3
Washer
Angle adjustment screw
Hexagonal bolt
(speaker turn-
prevention
bolts)
Post
Base plate
Joint
1
2
3
4
5
4
JA
P
ANESE
GERMAN
FRENCH
IT
ALIAN
S
P
ANISH
ENGLISH
Commercially-available spikes (M8) can also be
installed instead of the accessory spike hole seals and
feet.
5
•
•
The speaker is heavy, so lie it on the floor and place
your hands around it when installing it.
•
•
Lay a soft cloth or similar on the floor to prevent any
damage to the speaker and the floor while working.
Install the spike hole seals and feet into the spike
mounting holes in the base plate (5 places).
4
Commercially-available spikes (M8) can also be installed
instead of the accessory spike hole seals and feet.
Spike hole seal
7
Foot
8
Tip
Speaker Stand
