- 6 -
JA
P
ANESE
ENGLISH
G
ERMAN
F
RENCH
IT
ALIAN
S
P
ANISH
- Assembling the speaker stand (for D6) -
Install the base plate and the post with the pan-head
bolt.
1
2
Assemble the joint and the post with the Screw
(binding).
3
Speaker
Washer
Angle adjustment screw
Speaker Stand
Place the insulator under the base plate, and then
install the spikes and nuts to the base plate.
•
•
Turn the spikes clockwise one at a time. Once the end
of the spike feels as though it is touching the insulator,
secure with the nut.
Insert the speaker into the joint, adjust it to the
preferred angle, and then tighten the washer and
angle adjustment screw to secure it in that position.
4
•
•
The speaker is heavy, so lie it on the floor and place
your hands around it when installing it.
•
•
Lay a soft cloth or similar on the floor to prevent any
damage to the speaker and the floor while working.
Pan-head bolt
Screw (binding)
Post
Base plate
Joint
1
2
3
5
4
Spike
7
Insulator
9
Insulator
9
Hexagonal nut
8
Spike
7
Tip
Hexagonal nut
8
