background image

Eclipse RatioAir v1 Design Guide No. 115, 11/12/2008

2

Copyright 2005 by Eclipse, Inc. All rights reserved worldwide. 

This publication is protected by federal regulation and shall not 

be copied, distributed, transmitted, transcribed or translated 

into any human or computer language, in any form or by any 

means, to any third parties, without the express written consent 

of Eclipse, Inc.

In accordance with the manufacture’s policy of continual product 

improvement, the product presented in this brochure is subject 

to change without notice or obligation.

The material in this manual is believed adequate for the  

intended use of the product. If the product is used for purposes 

other than those specified herein, confirmation of validity and 

suitability must be obtained. Eclipse warrants that the product  

itself does not infringe upon any United States patents. No  

further warranty is expressed or implied.

We have made every effort to make this manual as accurate 

and complete as possible. Should you find errors or omissions, 

please bring them to our attention so that we may correct them. 

In this way we hope to improve our product documentation for 

the benefit of our customers. Please send your corrections and 

comments to our Marketing Communications Manager.

It must be understood that Eclipse’s liability for its product, 

whether due to breach of warranty, negligence, strict liability, or 

otherwise is limited to the furnishing of replacement parts and 

Eclipse will not be liable for any other injury, loss, damage or 

expenses, whether direct or consequential, including but not 

limited to loss of use, income, or damage to material arising in 

connection with the sale, installation, use of, inability to use, or 

the repair or replacement of Eclipse’s products. 

Any operation expressly prohibited in this Guide, any  

adjustment, or assembly procedures not recommended or  

authorized in these instructions shall void the warranty. 

C

opyright

D

isClaimer

 N

otiCe

l

iability

 

aND

 

W

arraNty

Summary of Contents for RA Series


















Reviews: