Limit switch programming and adjustments are made thorough the following
buttons. Images shown are based on a single function remote.
(1) = Up - retracts the fabric cover
closed
(4) = Used to copy remote
(2) = Stops the fabric in any desired position
(5) = Programming button
(3) = Down - extends the fabric cover
out
REQUIRED: small paper clip or a small stiff wire
SETTING THE CLOSED LIMIT
The CLOSED limit must be set first as
a programming requirement. PRESS &
HOLD the programming
button (5)
until the motor jogs.
PRESS & HOLD the UP
button (1)
to bring the
front bar in to where limit
will be set.
Press the STOP
button (2)
, and
the motor will jog. The CLOSED
limit has been set.
SETTING THE OUT LIMIT
To set the Out limit: PRESS
& HOLD the DOWN
button (3)
on the transmitter to move
the front bar to the out limit.
Press the STOP
button (2)
and the motor will jog. The
out limit has been set.
YOU ARE DONE!
LIMIT SETTING
PROCESS IS COMPLETE
A
B
C
E
F
*
You do have the option at time of order to select the Somfy 220 Volt Altus motor instead
of the Gaposa Motor for larger units.
They operate at the same speed, come with the same warranty, but may be easier for you
to program based on your familiarity with Somfy motors or tie it remotely to other
motorized units at the site.
Summary of Contents for SunRoof Plus
Page 17: ......
