Eclipse ThermJet TJSR Series Quick Instruction Manual Download

Page: 1 / 4

Thank you for purchasing burners from Eclipse. This Quick Instruction Guide will help with the unpacking and preparing

your burners for installation.

Figure 1.

Figure 2.

In order to protect the fragile components, self

recuperative burners are packaged and shipped partially

disassembled.

A standard shipment includes the burner air housing/

eductor/combustor assembly, the rear cover/nozzle

assembly, exhaust tube, extension flanges and spark

rods. Your packaging should be similar to Figure 1.

The exhaust housing and burner rear cover housing are

bolted to the frame of the shipping crate. A ratchet or

wrench will be required to remove those items from the

crate (Figure 2).

NOTE:

Spark rods and gaskets are either secured in the

lower section of the crate or shipped in seperate

packaging. Ceramic exhaust tubes are also shipped

separately. Please do not forget to take care when

removing these items.

Quick Guide 208

2/9/2012

Eclipse ThermJet Self

Recuperative Burner

Model TJSR0020-TJSR0060

Summary of Contents for ThermJet TJSR Series

Page 1: ...bly exhaust tube extension flanges and spark rods Your packaging should be similar to Figure 1 The exhaust housing and burner rear cover housing are bolted to the frame of the shipping crate A ratchet...

Page 2: ...supported by a foam insert Figure 3 Please take caution when removing these from the crate Foam insert After the items are uncrated remove the spark rod from the protective tube Figure 4 The spark ro...

Page 3: ...paper install the spark rod Figure 6 After the rod is installed in the burner the nozzle and rear cover assembly can be inserted and attached to the air housing At this point your burner is ready to...

Page 4: ...Quick Guide 208 2 9 2012...