- 2 -
A: Remove the door from the system.
If your door is not currently in place – please skip to step 2.
1
F: Remove the 3 screws holding the rear hanging bracket into place
and slide this free of the door.
This will allow you to remove the door entirely.
B: Remove the grey cap off the leading edge
of the door at the top to reveal the brackets.
E: Simultaneously slide and pivot the leading edge of the door
out of the system to reveal the rear hanging bracket.
C: Insert black grub screws into the lower hole in the leading hanging
bracket (this lifts the locking lever).
D: Slide the leading hanging bracket out from the leading edge of
the door,slightly lifting the door as you go will help this process.
