ENGLISH
Translation of the original German user manual
26
b.
Programming your personal double shot t2:
Stop grinding early as desired by pressing the grinding button. After the remaining time appears on the
display, call up
t2
via the display.
Wait a short while after adjusting the time until
‘t1’
reappears on the display.
Press
‘
-
’
so that
‘t2’
is indicated.
If you would like to solely adjust
‘t2’
and keep
‘t1’
unchanged, press
‘
-
‘
on the display immediately
after
‘t1’
appears in order to reach
‘t2’
directly.
Now you can reduce the remaining time from the
preset grinding time for
‘
t2
’
in tenths of a second
by quickly pressing
‘
-
’
(increase the time again by
pressing
‘
+
’
)
For example: the preset time for
‘t2’
was 7
seconds and your remaining time was 00.7
seconds. This results in the new grinding time for
‘t2’
,
for two portions of 06.3 seconds.
5.3.2 Barista Mode
The Barista Mode allows to swap between different doses quickly and easily
–
just by simply pressing the
grinding button once briefly.
Display
Please make sure the display indicates a single line in the middle.
Grinding is activated by pressing the grinding button.
Single Shot
–
Press the button once
In order to get one portion of grounds, simply press the grinding button once briefly with the portafilter.
In our experience it will take about 3.8 to 4.2 seconds to grind for one espresso.
Although, this does depend on the grinding level as well as the coffee beans.
Double Shot
–
Press the button twice
In order to get 2 portions, quickly depress the grinding button twice with the portafilter.
In our experience it will take about 5.2 to 6.2 seconds to grind for two espressos.
Although, this does depend on the grinding level as well as the coffee beans.
