●
Extended diaphragm life through material selection and design
●
Performance over the -40 to +125C temperature range
●
Eliminate LPG fuel contamination Issues
●
Superior low flow resolution and repeatability, eliminates idle adjustment
●
Backfire resistant through design enhancements
Intake air system
The intake system should be sealed between the mixer inlet and the filter. Proper clamps should be used
to ensure unfiltered air is not drawn into the system. Use piping with a minimum diameter equal to
mixer inlet. When in an enclosure it can sometimes be necessary to use an externally mounted filter. It
can be beneficial to engine life and performance to draw in air from the coolest location possible
Figure 9 Intake Air System
33
