- 2 -
Please read this manual carefully before use!
Thank you for purchasing our 200W COB WHITE LED PAR64. Please read user
guide for safety and operations before using. Keep this manual for future reference.
1. Safety Instructions
Please keep this User Manual for future consultation. If you sell the fixture to
another user, be sure that they also receive this intruction booklet.
Please unpack and check carefully there is no transportation damage before
using the fixture.
Please disconnect main power before servicing and mantenance.
The unit must be installed in a location with adequate ventilation, at least 50cm
from adjacent surfaces.Be sure that no ventilation slots are blocked.
The maximum ambient temperature is Ta:40
°
C. DO NOT operate it where the
temperature is higher than this.
DO NOT connect the device to any dimmer pack.
The housing must be replaced if they are visibly damaged.
Unit surface temperature may reach up to 85
°
C. Don
’t touch the housing
bare-hand during its operation. Turn off the power and allow about 15 minutes for
the unit to cool down before replacing or serving.
There are no user serviceable parts inside the fixture. Do not open the housing or
attempt any repairs by yourself. In the unlikely event your fixture may require
service, please contact your nearest dealer.
In the event of serious operating problem, stop using the fixture
Immediately. Never try to repair the fixture by yourself. Repairs carried out by
unskilled people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center. Always use the same type spare parts.
2. Safety Instructions
1/2/3 Channel Mode;
Dimmer, Strobe;
Ideal for Professional stages, Concerts, Clubs, Discotheques, Mobile Djs, etc.
Input Voltage:
AC100V~240V,50/60Hz
Total Power consumption:
230W