866.463.2611 • www.ecosystemsdisplays.com
Step 3
Connections are made by holding the button
down and sliding the red tube into opposing
tube until the connection is made. To disassemble
push button and pull or twist extrusions apart.
Push-Button
Push-Button
6
6
6
6
Numbered Label
Using Your Setup Instructions
The Aero Overhead Sign Setup Instructions are created specifically for your configuration. They include an
exploded view of the frame which is sequentially numbered. We encourage you to study the instructions
before attempting to assemble your exhibit.
Connections are kept very simple: no tools. Everything assembles with push-button
connectors and pre-connected horizontal sections.
Cleaning and Packing Your Display
1) Use care when cleaning aluminum extrusion or acrylic inserts. Use only non-abrasive cleaners.
2) Retain all packing material. It will make re-packing much easier and will reduce the likelihood
of shipping damage.
3
8A
Top View
Q918
Aero Frame
Aero Frame Attachment
Steps:
1) Assemble Aero header parts in numerical order as shown.
2) Apply Pillowcase Graphic to assembled Aero frame.
3) Attach Aero Frame to backwall verticals, as shown.
Then slide bolts on
Aero frame into groove
of vertical extrusion
until resting on V4 stop.
Slide V4 stop into
groove of extrusion
& tighten set screw
to secure in place.
Q918
V4 stop
set
screw
bolts
Aero Frame
1
2
3
4
5
6
7
8
9
10
12
13
14
15
16
Bolts
Bolts
17
19
18
20
11
Top View
Q918
Aero Frame
