Continuation of point 6.
“Manual calibration/basic setting of your clock”
(2)
The LCD Display now ch
anges to “HPO” (Hour Position) and the digital hour blinks. Press
Start/Stop
to set the digital hour to the analogue hour. Now press
MODE
to confirm and to get to the next setting.
(3)
The LCD Display now shows MPO (Minute Position) and the digital minute blinks.
Press
Start/Stop
to set it the same as the analogue minute. You can then end
calibration by quickly pressing
SET,
so that “RX” appears in the lower right LCD Display
in the upper LCD Display. Signal searching now starts and the hands start turning after a short time
(transmitter signal).
If reception is successful, the antenna symbol appears in the upper right LCD Display
and the radio time is displayed.
If the transmitter signal is unsuccessful, the clock hands go back to the last received time
and the antenna symbol is not visible. In this case, repeat manual calibration
at another location, since the radio signal could not be received.
7.
Changing the analogue time zone (clock hands) and activating/deactivating summer time (DST)
If Modus 1 is being displayed, press the
SET
button for about 3 seconds. You now change to the program mode “T1”. The analogue time zone is now blinking in
the upper display.
Press the
Start/Stop
button to change the time zone for analogue display. Press
MODE
to confirm
the selected time zone and to set DST (Daylight Saving Time/Summer Time)(“ON”/”OFF”) in analogue time. “ON” or “OFF” will no
w appear in the upper display
. Press
Start/Stop
to deactivate/activate this function. The “DST” symbol is shown in black in the upper LCD field
if summer time has been set.
Now finally confirm your settings by pressing the
SET
button. The clock will now set itself to the selected settings.
If you are in the reception area of the radio signal DCF77, the transmitter signal (Point 3) and manual calibration (Point 6) are possible in this modus
with a subsequent radio signal search.
8.
Manual setting of analogue time and the date (no radio operation), differing from the programmed time zones
If a time zone is required that is not shown in the programmed world times, please proceed according to this point.
You are in Modus 1. Any time zone has been set. Now press the
SET
button for about 3 seconds. The time zone is blinking in the upper display.
T1 appears in the lower right display. Now press
MODE
two times. The hour is now blinking in the lower right display. Make the changes
by pressing the
Start/Stop
button. You can get to the next setting by pressing the
MODE
button. The order of settings is as follows:
Clock time: Hours->Minutes-> Calendar: Year->Month->Calendar day. After you have entered the settings you require, confirm with
SET.
The clock will now set itself to the selected settings. Radio operation is not active after manual setting of analogue clock time.
9.
Setting the language
Proceed as follows to change the language of the display of the day of the week:
You are in Modus 1. Now press the
SET
button for about 3 seconds. You now change to the program mode “T1”. The analogue time zone
will now blink in the upper display. Now press the
MODE
button
7x
(you skip the clock time and date in the lower right LCD Display by doing so),
until the day of the week and the date appear in the lower right display and the language abbreviation blinks in the upper LCD display (see
product properties)
.
Now change the language by pressing the
Start/Stop
button between
“GER”
for German/
”FRE”
for French/
”SPA”
for Spanish/
“ITA”
for Italian/
”ENG”
for English. Press
SET
to end the procedure now that you have selected the language you wish.
The day of the week will now be displayed in the desired language in the lower right LCD Display.
10. World time: 38 cities
SAM
SAMOA
AUC
AUCKLAND
ROM
ROME
HNL
HONOLULU
NOU
NOUMEA
MAD
MADRID
ANC
ANCHORAGE
UTC
Coordinated Universal
Time
LON
LONDON
BER
BERLIN
AZO
AZORES
GUM
GUAM
CAI
CAIRO
LAX
LOS ANGELES
JNB
JOHANNESBUR
G
SAN
SAN DIEGO
MOS
MOSCOW
DEN
DENVER
DXB
DUBAI
CHI
CHICAGO
KHI
KARACHI
DAL
DALLAS
DEL
DELHI
MEX
MEXICO
DAC
DHAKA
NYC
NEW YORK
BKK
BANGKOK
CCS
CARACAS
HKG
HONG KONG
RIO
RIO DE JANEIRO
BJN
BEIJING
SAO
SAO PAULO
SIN
SINGAPORE
BUE
BUENOS AIRES
TYO
TOKYO
MID
MID ATLANTIC
SYD
SYDNEY
PAR
PARIS
11. Declaration of conformity
We hereby declare that this wristwatch complies with the fundamental requirements and further relevant regulations of Directive 1999/5/EC.
12. Information regarding environmental protection
Disposal of used devices. At the end of its service life, this product must not be disposed of with your normal waste, but instead must be returned to a recycling
facility for electric devices. This is indicated by the symbol on the product or in the user manual. The materials are recyclable in accordance with their marking.
By reuse, recycling or other forms of utilizing old devices you are assisting considerably in the preservation of the environment. Please contact your local
authorities to retrieve the address of your nearest disposal facility. Disposal of packaging materials. Packaging materials are raw materials and can thus be
recycled. In the interest of environmental protection, please recycle them properly. Your local authorities will gladly inform you.
13.
This product complies with the EMC Directives of the EU.
ENG
–
03/15
3/3
Trend News Europe GmbH, Eichholzer Str. 3c, D-21436 Marschacht
