ETS 73
0548-990-51---60g_2019.10.indd
0548-990/52g
Page 13 of 98
Mounting and operating instructions
* For obtaining
the protection
type IP 42, the
drive mechanism
covering must be
sealed all around!
Sealing compound
e.g. 6450-105
Adhesive tape
transparent
3.6
Technical data
Drive mechanism
Standard
Power transmission
Normal rods
Sliding rods
Dimensions drive mechanism
Height 95 mm
Width 690 mm
Depth 120 mm
Weight drive mechanism
10,5 kg
Ambient temperature
-15...+50 °C
May only be used in dry rooms
max. relative humidity 85 %
Protection type
IP 40 (IP 42*)
Operating voltage
230 VAC (+10/-15 %), 50 Hz, 10/13 A
Power consumption drive mechanism
max. 560 W
Motor power rating
100 W
Power supply external comsumer
24 VDC (±10 %), 2 A
Torque output shaft
80 Nm permanent
240 Nm max.
Distance door hinge - Output shaft
lintel mounting
280 mm
leaf mounting
380 mm
Lintel depth
normal rods
max. 250 mm
sliding rods
pl -30/+80 (+200) mm
ps -30/+70 (+200) mm
Door opening angle
max. 105°
Weight of door leaf
max. 250 kg
Width of door leaf
EN 3...7 (851...1'600 mm)
see chapter "Application limits"
Opening speed
2,4...20 s adjustable (max. 40°/s)
Closing speed
2,4...20 s adjustable (max. 40°/s)
Range of the accelerating function (foreceful
closing) (without mains power)
5...15° stepless adjustable (mechanical)
Motor damping (without mains power) within the range
of the accelerationg function (forceful closing)
stepless adjustable (adjusting trimmer)
Hold-open time
0...60 s
Hold-open time Night
0...180 s
