ETS 73
0548-990-51---60g_2019.10.indd
B
A
C
D
500
830
1,5
1,5
27
52,5 / 76,5
65,5 / 89,5
E F
C
G
D F
E
G
F
D
1,5 Nm
B
0548-990/52g
Page 44 of 98
Mounting and operating instructions
2. Mount the drive mechanism.
3. Close the door leaf
.
4. Install the mounting profile (E) on the lintel.
5. Screw down the rotating arm (B) parallel to the drive mechanism.
6. Push the guide profile (G) over the glider (C) and hook it into the mounting profile (E).
7. On both sides insert and screw down (with 1,5 Nm) the expansion element (F).
8. Snap in the covering caps (D) on both sides.
Attention:
Check the motional sequence of the door leaf:
The rods must not touch. If the glider (C) makes screeching noises, it needs to be lubri
-
cated wih a little WD40.
