background image

Montageanleitung / Assembly instruction

Die FS-Zulassung gilt nur für komplette ECO FS-Garnituren oder Kombinationen aus ECO FS-Einzelteilen, die gemäß DIN 18273 eine abgestimmte Baugruppe bilden. Für die Montage 
dürfen nur ausschließlich ECO- Originalteile verwendet werden. Die Montagearbeiten, inkl. aller Bauteile (Schrauben und Stifte) müssen gemäß Anleitung von einer qualifizierten Person 

durchgeführt werden. Bei Nichtbeachtung entfällt jeglicher Garantieanspruch.

FS-approval only as a complete ECO FS-set or as combination of individual ECO FS-parts. Constituting an aligned assembly group according to DIN 18273. Only original ECO parts have to 
be used. The assembly has to be made by a qualified person according to the mounting instruction, including all parts (screws and pins). In case of non-respect the guarantee is invalid.             

für Rosettengarnituren 
for handle sets with rosettes                                                           

Magis

8

Zubehör / Accessories

Befestigungsrosette
Art.Nr. 10 910 700.46

fastening rose

Art.No. 10 910 700.46

Bohrschablone
Art.Nr. 930318

drilling template

Art.No. 930318

ECO-Kappenheber

Art.Nr. 10 910 618

ECO Cap lifter

Art.No. 10 910 618

Montageanleitung / Assembly instruction

Die FS-Zulassung gilt nur für komplette ECO FS-Garnituren oder Kombinationen aus ECO FS-Einzelteilen, die gemäß DIN 18273 eine abgestimmte Baugruppe bilden. Für die Montage 
dürfen nur ausschließlich ECO- Originalteile verwendet werden. Die Montagearbeiten, inkl. aller Bauteile (Schrauben und Stifte) müssen gemäß Anleitung von einer qualifizierten Person 

durchgeführt werden. Bei Nichtbeachtung entfällt jeglicher Garantieanspruch.

FS-approval only as a complete ECO FS-set or as combination of individual ECO FS-parts. Constituting an aligned assembly group according to DIN 18273. Only original ECO parts have to 

be used. The assembly has to be made by a qualified person according to the mounting instruction, including all parts (screws and pins). In case of non-respect the guarantee is invalid.             

für Rosettengarnituren 
for handle sets with rosettes                                                           

Magis

9

Technische Hinweise / Technical notes

Radiales & axiales Spiel:
Diese Drückergarnitur kann Unebenheiten auf der Türoberfläche bis zu 3° ausgleichen, jedoch wird auch in der 
DIN Norm 18273 auf mögliches Spiel hingewiesen:
„Aufgrund der Lage der Toleranzfelder von Türdrückerstift (8,91mm bis 8,98mm) und Innenvierkant der Nuss 
(9,0mm bis 9,1mm) kann es zu einem nicht unerheblichen Spiel zwischen Türdrückervierkant und Schlossnuss 
kommen. Dieses Spiel kann zu einem maximalen Totgang des montierten Türdrückers von 5mm, gemessen in 

einem Abstand von 100mm vom Drückerdrehpunkt, führen.“ 
Insbesondere bei zweigeteilten Panikstiften kann dieses Spiel unvermeidlich sein.

Radial and axial play: This latch can compensate for uneven door surfaces of up to 3°, however DIN Standard 
18273 refers to possible play: „Due to the tolerance fields of door handle pins (8.91 to 8.98 mm) and the inner 
square of the nut (9.0 to 9.1 mm) there can be a considerable amount of play between the door latch square and 
the locking nut. This play can lead to a maximum rotation of the installed latch of 5 mm, measured in a distance 
of 100 mm from the pivot point of the handle.“ 1 In the case of two part panic pins in particular this play can be 
unavoidable. 

This means that the door handle can waggle slightly up and down. The ECO OKL Magis door latch fitting 

prevents this from happening because it has a return spring setting with 90° fixed stop. The sense of play in the 
handle is thus significantly reduced and it far exceeds the requirements of standard EN 1906.

 DIN 18273 : 1997-12: Construction hardware - door handle fittings for fire protection doors and smoke 
protection doors – Definitions, Sizes, Requirements and Tests, Annex A. 

 

                                      

                                      

OKL Magis Modelle / OKL Magis versions

                                      

                                      

Pflegehinweise / Care instructions

Die Pflegehinweise für dieses Produkt finden Sie unter http://www.eco-schulte.de

 You can find the care instructions on our homepage, http://www.eco-schulte.de.

K-

13

5

K

-1

6

0

K

-1

6

5

K-

11

6

D

-3

30

D

-4

90

D

-5

10

D

-4

10

D

-1

10

D

-190

D

-3

10

Drücker

Lever

Knöpfe
Knobs

1

Summary of Contents for OKL Magis













Reviews: