IX. SETTING AND FUNCTION OF MENU
1.Switch on the device
Press the “On/Scan” button, one second after the
screen panel in full display, it will enter the standby
mode with the sign “---°C” or “----°F”.
Then press the “On/Scan” button again, you will get
the measuring result in 1 second. But if there is no
more operation, it will turn off in 30 seconds automati-
cally.
2.In the switch on state,
Setting the mode
a. Press “MODE” button, and the screen will display:
Body…°F
b. Press again “MODE” button and the screen will
display: Room…°F
c. Press again “MODE” button and the screen will
display: Surface Temp…°F
Note: The thermometer default is set to BODY
Important!
The surface temperature differs from the
internal body temperature. To obtain the
internal temperature, always use the “BODY”
mode. Please make sure to select “SURFACE
TEMP” mode for an external area reading.
MODE
On/Scan Button
°C/°F
MEM
Language
Symbol
Low Battery
Memory
Temperature
Fahrenheit
Celsius