@2021 EcoAir
-
C480 V1
Page 8
All rights reserved
OPERATION
ON/OFF
TO
OPERATE
UNIT
•
Place the unit in an upright position on an
even level surface.
•
Plug the unit into the mains socket.
•
Press the ON/OFF button to operate the
unit.
•
Select the desired Mode.
•
To switch the unit OFF, Press the ON/OFF
button. Note the fan will run for 2
minutes, to help cool and protect the
internal components.
(TIP: do not unplug the power socket until
the fan stops)
MODE SETTING
•
Press the
“
MODE
”
setting button to set the mode in the
following loop. The LED display will guide you.
TIP: Avoid using the Laundry modes for normal daily use.
You may use to dry very damp rooms over
2
–
3
days and
then switch to the recommended Economy mode.
Press
the
“
MODE
”
setting button to set the mode in the following
loop. The LED display will guide you.
TIP: Avoid using the Laundry modes for normal daily use.
You may use to dry very damp rooms over
2
–
3
days and
then switch to the recommended Economy mode.
Auto
Select to keep the room at a
comfortable level
•
Toggle automatically to control
humidity to your desired select-
ed humidity level between 40%
-
60% (5% intervals). Optimises
energy saving and comfortable
humidity level
Economy
Select to run in Economy mode
•
The unit dehumidifies in Econo-
my mode and in a quiet setting
to approximately 40
-
60% RH (5%
intervals).
•
Use this mode in your daily
normal household once the ideal
humidity level has been reached.
Highly recommended for night
use.
Hi
Select High mode to quickly control
high levels of humidity
•
The unit brings the humidity
down to approximately 40
-
45%
RH (5% intervals) to control
problem areas quickly.
Laundry Mode
•
Select the laundry mode for
continuous dehumidification,
and the display will show
“
Co
“
at
the same time. While selecting
the laundry mode, the Humidity
Setting is disabled.
Note : The display will go back to
the ambient humidity level in 3
seconds, after setting the
laundry mode.
HUMIDITY SETTING
•
Press the humidity setting button to set your desired
humidity level from 40% to 60% in 5% intervals:
Note : The display will show the ambient humidity level 3
seconds after setting the desired humidity level.
ENERGY SAVER MODE
•
The Energy Saver Mode will reduce energy consumption.
As soon as the desired humidity level is reached, the
dehumidifier will pause for 15 minutes and will sample
the air for 2 minutes to detect humidity. If the humidity
has increased by 5% RH or more, it will start dehumidifi-
cation, otherwise it will return to the sampling mode.
(Pausing for 15 minutes and sampling for 2 minutes).
Note :
when the dehumidifier is in sampling mode, the
humidity settings indicator light will flash. (See Page 7 for
more information)
Auto
→
Economy
→
High
→
Laundry Mode
→
