En
glish
6
QUICK START UP
STEP 3
-
ON/OFF
TO
OPERATE
UNIT
•
Place the unit in an upright
position on an even level surface.
•
Plug the unit into the mains
socket.
•
Turn the humidity stat dial
clockwise to select desired
mode. (Power ON indicator
lights up)
•
Turn anti
-
clockwise to switch the
unit OFF.
STEP 1
-
WHERE TO POSITION YOUR
DEHUMIDIFIER?
Ensure the unit is a safe distance away from a
wall or furniture and away from direct sun
light.
TIP:
Position the dehumidifier in the dampest
room or somewhere central like a landing or a
hallway. As long as the internal doors are open
the excess moisture from all of the rooms in
the house will migrate naturally towards the
dehumidifier and be processed.
STEP 4
-
DRY/LAUNDRY MODE
Low
Select to keep the room at a
comfortable level
•
Dries the air to approximately
70% RH and stops dehumidifying.
Medium
Select to run in Medium mode
•
Dries the air to approximately
50% RH and stops dehumidifying.
High
Select High mode to quickly control
high levels of humidity
•
Dries the air to approximately
40% RH and stops dehumidifying.
Laundry
•
Use for drying clothes. The
dehumidifier will continuously dry
the air until the settings are
changed manually. It typically
takes 2 –
4
hours to dry your
laundry.
STEP 2
-
CAUTION
-
AVOID USING IN
•
Small confined area i.e. broom cupboard,
boiler room, unventilated rooms etc.
•
Close proximity to a heat source such as
heater, tumble dryer, cooker.
•
Dusty, building sites or an industrial
environment where particles can clog up the
filter or internal components. This will cause
the unit to malfunction, voiding your
guarantee.
