6
3. USE ACCORDING TO THE INTENDING
Improper use of the bike or use contrary to its intended use may involve danger and expose
you to loss of health or life. If you have any doubts whether the purpose of the bike matches
your ridding style - ask the seller.
3.1 MOUNTAIN BIKE
This type of bicycle work well on paved surfaces and paths. They combine comfort and
driving dynamics. It has a sturdy frame and large, 28-inch wheels. The user’s position on the
bike is very comfortable and allows hours of riding. These types of bicycles, and in particular
their braking system, have been designed for a maximum load of 125 kg (b cyclist
+ luggage), the weight of the cyclist with luggage may not exceed 100 kg.
This bike is designed for recreational purposes, not for competitive purposes. For riding on
public roads, bicycles without standard accessories, should be equipped with front and
rear lighting, bell, reflections on the pedals and spokes of the wheels, in such a way that
the bike meets the requirements of the traffic regulations.
3.2 CENTRAL MOTOR
An electric bicycle equipped with a central motor allows you to ride on the same terrain as
a hub motor, with the difference that it allows you to move smoothly on slopes, using the
minimum force of the user. When driving uphill, it is natural that the speed drops. Depending
on the slope of the climb and the force of pedaling by the user, the engine will minimize
the overload, allowing you to achieve a speed proportional to these conditions. The system
will restart the engine when the temperature returns to normal. Improper use of the bike or
use contrary to its intended use may involve danger and expose you to loss of health or life.
If you have any doubts whether the destination of the bicycle corresponds to your ridding
area (mountains, city, asphalt, etc ...) - ask the seller if the chosen model will be suitable.
4. STORAGE AND USING
The bicycle is not intended for long-term outdoor storage (max 12 hours a day.
The bicycle should be stored in a dry place at room temperature.
The bicycle should be stored away from corrosive products and places.
5. BEFORE RIDDING
Always check the technical condition of the bicycle before every ride, especially:
Air pressure in the wheels, remember to observe the pressure range specified by the
manufacturer on the tire.
Check the tire condition for deformation, cracks and whether the tire adheres to the
rim and does not stick out beyond the rim.
Checking wheel screws.
Checking the handlebar and stem (whether it does not rotate or is not loose).
Checking the screws of saddle (does not rotate or fall under the weight).
Check if the bicycle lighting (front and rear) works well.
Checking the beep (bell).
If there is no visible safety groove on the side surfaces of the rim, the rim should be
replaced.
