14
Note:
If the inclusion was not successful completed the
LED is flashing separately red and green.
Note:
During the inclusion/exclusion phase, the device
should be within 1 meter of MyVirtuoso Home gateway.
Operation
If the inclusion operation was successful:
•
Switch ON: red LED.
•
Switch OFF: green LED.
LED meaning depending on energy load:
•
0
~ 3 AMP: green LED.
• 3 ~ 7 AMP: orange LED.
• 7 ~ 10 AMP: red LED.
When overload state occurs (the load is more than
10.5A) the module is automatically disabled, overload
state can be cleared by unplugging and reconnecting
the module from the wall socket.
Manually turn the connected appliance On/Off by
pressing the On/Off button.
